FOLS Pneumatic penetrating plug valve

Pneumatic Knife Gate Valve

Single Acting: (spring reset):Two position control for valve opening or closing.

Double Acting: When the circuit and gas path are cut off or faulty, the valve automatically opens or closes.

Pneumatic classification:

Pneumatic knife gate valve is a complex automation control instrument, consisting of various pneumatic components and valve bodies, used in situations where rapid cutting or opening is required.

Flange Standards: National standard GB/T9113.1-2000, Ministry of Machinery JB/T79.1-1994, Ministry of Chemical Industry HG 20592-2009, American standard ASME B16.5, German standard EN1092-1:2001

Optional Accessories

·   Single or dual control solenoid valve (available in 24V, 220V and other voltage options, explosion-proof solenoid valve can be selected if necessary).

·   Proximity switch (or travel switch)

·   Triple components for air source treatment (including pressure reducing valve, filter, and oil mist device).

·   Electric/pneumatic valve positioner (for regulating type).

Select the suitable actuator with our assistance!

Air supply pressure the minimum supply pressure is 2.5 Bar,the maximum supply pressure is 8 Bar.

Main parameters and performance

Valve Introduction

Pneumatic knife gate valve is a complex automation control instrument, consisting of various pneumatic components and valve bodies, used in situations where rapid cutting or opening is required.

Application

·    Apply To

·    Food Metallurgy

·    Mining Building Materials

·    Chemical Industry

·    Water Supply And Drainage

·    Sewage Treatment

·    Coal Mining

·    Power Plant

Wait for the industry to control traffic changes or quickly cut off.

Valve Introduction

Pneumatic knife gate valve is a complex automation control instrument, consisting of various pneumatic components and valve bodies, used in situations where rapid cutting or opening is required.

FOLS Pneumatic Sanitary Ball Valves provide you with a safe and reliable fluid control solution. Sanitary ball valves are made of safe materials. Both the inside and outside of the valve are polished and sterilized. What's more, the ball valve incorporates food-grade seals to avoid food contamination.

Use with pneumatic actuators for easy remote control. Provide you with cost-effective and intelligent fluid control solutions.

If you have any demand for actuator or wanna get a free actuator solution, please contact us [email protected]
For more product inquiries, please contact us www.folsv.com/contact

·   Confirm the valve size you need. We offer this Pneumatic valve in 2in to 20in.

·   Confirm the valve body material you need. We offer this pneumatic valve in WB, Cast steel, Stainless steel 304, Stainless steel 316 material.

·   Confirm the connection standard. We offer this motorized ball valve in ANSI, JIS, DIN, and UK standard.

·   Confirm the pressure and working temperature. Pressure and temperature are the important points and those may affect the cost.

·   Confirm the voltage you need. The right voltage could help your valve operate better.

·   Tell us your medium. Different medium has different features and we will help you to select the valve basic on the medium requirements

·   Confirm the actuator type you need. We have Double acting or Single Acting Spring Return Pneumatic Actuator for your project.

·   Any requirements please tell us like core material, sealing material, or connection standard. We could help you to custom the valve you need.

·   More information, please send message to us. Quote will be provided within 2 hours! 

Installation Instruction

·   Tightening the seal between the valve and the actuator: Remove the four bolts underneath the actuator. Separate the actuator from the valve

·   Tighten the nut on the top of the valve body.

·   Place the actuator back on the valve and screw everything back into place

·   Tightening the seals between the valve and the inlet/outlet ports:Remove the torgue bolts and check for any debris or damage to the gaskets.

·   Use a torque wrench or other consistent method of tightening the torque bolts to reconnect the inlet and outlet ports.

Packaging and transportation:

As a professional manufacturer of pneumatic valves, FOLS aims to provide customers with the highest quality products, the most competitive prices, punctual delivery and comprehensive warranty services. We offer a full range of services from start to finish, including consultation and after-sales service, providing comprehensive support to ensure that you are by your side at every stage of the project.

Company:

FOLS is committed to providing customers with the highest quality products at the most competitive prices, on time delivery, and comprehensive warranty services. From beginning to end, we offer comprehensive services, including consultation to after-sales service, providing all-round support, to ensure that you have our company's company throughout each stage of the project. 45-year valve drive device manufacturer Accepts large-scale customization. 2 production bases, sufficient inventory,

Short delivery period, same-day shipment.

Using imported manufacturing equipment from Germany, 100% quality inspection before shipment, quality guaranteed. Provide industrial standard 1-year (12 months) warranty. Certified by ISO 9001, additional certifications include CE, TUV, RoHS, SGS, BV, explosion-proof and fire safety. Provide OEM/ODM services. Can produce JIS 5K/10K, ANSI 150lb/300lb/600lb/900lb standard products. K, ANSI 150lb / 300lb / 600lb / 900lb standard.